I'm preparing technical documentation for some software. For the installation, there are lots of screen grabs and they all have Figure x captions. What's the correct styling and means of referencing figures from text? In the absence of a style guide saying otherwise, your approach is fine. So is abbreviating to "Fig. It's also consistent with "Table", which I haven't seen abbreviated as "Tab.
Whatever you do, be consistent -- refer to all of your figures as "Figure N" and use that same text in the figure captions. If the figure isn't immediately adjacent to the text, use a cross-reference.
I believe all modern documentation formats support this. One final thought: if your style permits this, for step-by-step instructions consider dispensing with the figure references. Do the 15 screen shots involved in configuring such-and-such preferences for your product really need to be individually numbered and listed in the table of contents or table of figures?How to hyperlink references in LaTeX
Consider instead the following style:. In this style, the screen shots become part of the narrative. This only works if each screen shot is only relevant once, in its immediate context; if you'll need to refer to them from elsewhere in the document, numbering will make that easier.
I would suggest abbreviating the word "Figure" to "Fig. In all, you're perfectly correct: just a number would be fine:. For example, TeX-like document styles handle those issues themselves and even much hated MS Word has a couple of suitable presets. So the author has to choose the style once and for all and stick to it. Consistency is conciseness and clarity, and beauty. If you're referring to a figure that's further away, you also need a page number "See figure 9 on page 72".
Left to my own devices, I don't use figure numbering or table numbering either. However, I have worked on some assignments where its use was mandated by the corporate style guide. I always insert images right where I discuss them and make sure I use formatting that will keep the figure with the related text.
In that case, there's no need to refer to the figure elsewhere. If I need to refer to the figure again, I'm not shy about re-inserting the figure at the point of the new reference in the text. If I do need to refer to a figure, I use a linked cross-reference to the topic heading e.
In an environment where heading numbering is required, I'll use a linked cross-reference to the figure number. Note: I'm moderately allergic to abbreviations. I prefer to spell out things rather than abbreviate them. For words that are lengthy, I add a shortened version to my AutoCorrect list in Word and the shortened version is thus automatically replaced with the proper word.
Is there a way to the same behavior for both exports, either latex directives to translate into html links or Org links as in-file references for the latex export? PS: I'm aware that I may try to use pandoc, but I have never used it and I don't know if I will get the desired result, and I'd rather not use add additional tools to the toolchain. Thanks to the tip from rasmus in the comments, this is a better way to link to sections as it decouples the section name from the link name.
Sign up to join this community. The best answers are voted up and rise to the top. Asked 5 years, 7 months ago. Active 5 years, 7 months ago. Viewed 2k times.
For an example of what I'm dealing with please check the following snippet. Thanks in advance -- Edit, Added org-mode fragment as example. Joafigue Joafigue 5 5 silver badges 12 12 bronze badges. Can you give an example of your Org code? The second option you describe should actually do what you want.
Active Oldest Votes.
A couple of things. To reference the section Section name from your exampleyou use [[Section name]]. To reference that figure in your example, you use [[fig:image]]. Kaushal Modi Kaushal Modi I would recommend this as it makes references to headings orthogonal to the the displayed name.
To force custom-id to be used as labels you can use org-latex-prefer-user-labels in the git ver version of org it's called something else in 8. I'll try that out later today. But [[my-custom-id]] without the worked, but only for html exports. May be I just need to set that var.
Sign up or log in Sign up using Google. Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown.
Bibliography management in LaTeX
The Overflow Blog. Podcast Diving into headless automation, active monitoring, Playwright…. Hat season is on its way! Join us for Winter Bash Featured on Meta.Speech therapists care card locations
New Feature: Table Support.L a T e X is a great tool to create documents. It's based on the 'WYSIWYM' what you see is what you mean idea, meaning you only have to focus on the contents of your document and the computer will take care of the formatting. With L a T e Xit's very easy to create professional-looking material.
This article presents the basics of how to create a document.Episodes rock your retirement
The input file is just a plain text file, with the extension. It will contain code that the computer interprets to produce a PDF file. The first line of code declares the type of document, in this case is an article. Note: To learn how to generate the output file see our article on compiling. Open an example in Overleaf.Professional college essay ghostwriting for hire for university
The part of your. In the preamble, you define the type of document you are writing and the language, load extra packages you will need, and set several parameters. For instance, a normal document preamble would look like this:. The next three lines are self-descriptive. Anyway, you can see a description of what they actually do in the next section.
To display the title of your document you have to declare its components in the preamble and then use some additional code:. There is a block with three lines in the preamble that defines the information to be included on the title page.
Once you have that in the preamble now in the body of your document you can use the next commands for the information to be printed. In scientific documents, it's a common practice to include a brief overview of the main subject of the paper.
In L a T e Xthe abstract environment is for this purpose. The abstract environment will put the text in a special format at the top of your document. When writing the contents of your document, if you need to start a new paragraph you must hit the "Enter" key twice to insert a double blank line.
Notice that paragraphs have a white space before the first line. You can find more information in the Paragraphs and new lines article. For a more complete discussion about document structuring see the article about sections and chapters. Sometimes it's necessary to add comments to your L a T e X code for readability. In the last part of the example, you can see a comment environment. For this to work you must add the next line to your preamble:. See the reference guide for a full list of reserved characters.
Instead of getting numbers like 1, 2, I get??. Literally I mean??. What is wrong with my codes? How to make the references show correctly? This is useful when you have different types of labels e.
Learn more. Asked 7 years, 7 months ago. Active 7 years, 7 months ago. Viewed 12k times.
Display style in math mode
Yitong Zhou Yitong Zhou 1, 3 3 gold badges 20 20 silver badges 37 37 bronze badges. You might want to post this in TeX instead. Active Oldest Votes. You should "compile" your latex code twice to get numbers instead of question marks. Cool, I think I find my problem. YitongZhou: you should look into latexmk or the like, so that multiple compilations are done automagically.Researchgate scores meaning in medical abbreviation
Do you know what is going wrong? YitongZhou: If you define a label for something i. The Overflow Blog. Podcast Diving into headless automation, active monitoring, Playwright…. Hat season is on its way! Join us for Winter Bash Featured on Meta.
Biblatex is a modern program to process bibliography information, provides an easier and more flexible interface and a better language localization that the other two options. This article explains how to use biblatex to manage and format the bibliography in a L a T e X document. Overleaf provides several templates with pre-defined styles to manage bibliographies. See this link.
Open an example of the biblatex package in Overleaf. Some extra options, inside brackets and comma-separated, are added when importing biblatex :. This file contains records in a special format, for instance, the first bibliographic reference is defined by:. Not all the information in the. Biblatex allows high customization of the bibliography section with little effort.Marketing managers salaries richmond va salary
It was mentioned that several citation styles and bibliography styles are available, and you can also create new ones. Another customization option is to change the default title of the bibliography section. The bibliography can also be subdivided into sections based on different filters, for instance: print only references from the same author, the same journal or similar title.
It only takes a minute to sign up. Is it possible to display reference information inline with the reference? I have:. But I need to show the details of a reference in my text is it possible? And I don't just want to show a reference number. You can do this with natbib and the bibentry package:. You can also do it easily with biblatex :. If you are just beginning with bibliographies I would go with the biblatex solution, since it provides a much easier interface for modifying the formatting.
Although there are many existing. Sign up to join this community. The best answers are voted up and rise to the top. Display Reference in document [duplicate] Ask Question. Asked 9 years, 9 months ago. Active 9 years, 9 months ago. Viewed 6k times. Dean Dean 1, 4 4 gold badges 12 12 silver badges 19 19 bronze badges.
It only takes a minute to sign up. Why does my emacs say different? I though internally is just a pdflatex call and Sign up to join this community. The best answers are voted up and rise to the top. Asked 3 years, 10 months ago. Active 3 years, 10 months ago. Viewed times. Daniel Hitzel Daniel Hitzel 3 3 silver badges 12 12 bronze badges. I suggest you install the latest version via ELPA, drop the lines require 'tex and setq latex-run-command "pdflatex" in your. You can also check the output buffer with C-c C-l to see how TeX was invoked.
I don't think you are using pdflatex from Emacs when you compile your document. Probably it just calls to something that knows how to process just TeX. Active Oldest Votes. Sign up or log in Sign up using Google. Sign up using Facebook. Sign up using Email and Password. Post as a guest Name.
Subscribe to RSS
Email Required, but never shown. The Overflow Blog. Podcast Diving into headless automation, active monitoring, Playwright…. Hat season is on its way! Join us for Winter Bash Featured on Meta. New Feature: Table Support.
Related 5. Hot Network Questions.Creative marketing concepts llc philadelphia area
- Biblical literary genres list of books
- Rocky mountain research station publications
- Persuasive essay graphic organizer with counter argument
- Blood components and blood cell production
- Wustl research gateway health science fair
- Creative director marketing salary training software
- Essay house seven gables
- Paraphrase essay writing tool box work
- Articles on yale athletics sports academy
- How to write a poem analysis essay
- Digital marketing funnel metrics job services
- Applications of chinese philosophy in modern life
- Essay typer botulism meaning name
- Article punishments navy vs police
- Marketing specialist food brokerage training institute
- Quotes technically like jesus quote
- Thebibliography latex beamer green paint walls
- Professional presentation writers services usa
- Organization as communication
- Biology majors uga score tonight
- Best career objective quotes for resume